Video
85
NOTES
• When the audio level meter reaches the red point (0 dB), the sound may
be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the
7
8
[Microphone Attenuator] set-
ting (or [Surround Mic Attenuator] when the optional SM-V1 Surround
Microphone is attached to the camcorder).
• We recommend using headphones to check the sound level while
adjusting the audio recording level or when the microphone attenuator
is activated.
• This function can also be assigned to the custom key/dial (
0
Using Headphones
Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/
X
terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to
X
(headphones) output.
* Headphones can be used also in
mode but the function of the terminal can-
not be changed in this mode. Change the setting in advance in one of the other
operating modes.
* Only when performing the procedure in
mode.
•
J
appears.
Operating modes:
*
[FUNC.]*
8
[MENU]
8
6
8
[AV/Headphones]
8
[Headphones]
8
To close the menu:
8
[
a
]
To continue adjusting the volume:
8
[
f
]
8
[Volume]
8
Drag your finger left and right along
the volume bar to adjust the volume
8
[
a
]
CO
PY
Summary of Contents for VIXIA HF S20
Page 11: ...11 COPY ...
