Video
!
97
NOTES
• A video snapshot scene can be captured only during playback; it can-
not be captured during playback pause mode.
•
!
The captured video snapshot scene is saved to the same
memory that contains the source scene.
• Video snapshot scenes cannot be captured from any of the following
types of scenes.
- Scenes shorter than 1 second
- Scenes that were edited using the supplied software
ImageMixer 3
SE
and were then written back to the camcorder.
• When the source scene is itself a video snapshot scene, you may not
be able to capture a video snapshot scene depending on the length of
the source scene and the length currently selected for video snapshot
scenes.
• When you start capturing a video snapshot scene less than 1 second
from the end of the scene, the video snapshot scene will be captured
starting from the beginning of the following scene.
• During the playback of video snapshot scenes captured from a previ-
ously recorded movie, you may notice some anomalies in the picture/
sound at the point where the playback switches to a new scene.
Capturing Photos
You can capture a single photo or a series of photos. The size of the
captured photos will be [
)
1920x1080] and it cannot be changed,
but you can select the photo quality.
Please read the IMPORTANT section (
"
98) before using an Eye-Fi
card.
To select the photo capture settings
* The number displayed indicates the approximate number of photos that can be
recorded with the current quality setting.
Operating modes:
[MENU]
(
#
(
[Photo Capture from Video]
(
[
*
Single Photo] or [
+
Photo Sequence]
(
[
%
]
Continue from the same menu:
[Photo Capture Quality]
(
Desired photo quality*
(
[
#
]
!"
#$
98
!
Video
To capture the photos
1 Play back the scene from which you want to capture the photo.
2 Pause the playback at the point you want to capture.
3 Press
>
fully.
To capture a photo sequence, hold
>
pressed down. The scene
will be played back by frames and each frame captured as a separate
photo.
4 Touch [
+
] to return to the index screen.
IMPORTANT
• When capturing photos on an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also
Using an Eye-Fi card
(
"
146).
NOTES
• The data code of the photos will reflect the date and time of recording of
the original scene.
• Photos captured from a scene with a lot of fast movement may be
blurred.
•
!
Photos will be recorded on the memory selected for record-
ing photos.
• [
+
Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [
&
PF24]).
Dividing Scenes
You can divide scenes (original scenes only) in order to leave out the
best parts and later cut out the rest.
1 Open the [Original] index screen.
Operating modes:
!"
#$
Video
!
99
2 Select the scene you want to divide and touch it to start playing it
back.
3 Pause the playback at the point where you want to divide the
scene.
4 Open the scene division screen.
5 Bring the scene to a precise point, if necessary.
• During playback pause: Touch [
&
] to play back the scene. Touch
[
)
] or [
*
] to jump a frame backward/forward.
• During playback: Touch [
+
] to pause the playback. Touch [
A
] or
[
B
] for fast playback backward/forward.
6 Divide the scene.
• The video from the division point to the end of the scene will appear
as a new scene in the index screen.
NOTES
• When advancing/reversing frames while dividing the scenes, the interval
between frames is about 0.5 seconds.
• If the scene cannot be divided at the point where you paused the play-
back, advance/reverse a frame and then divide the scene.
• During the playback of a scene that was divided, you may notice some
anomalies in the picture/sound at the point where the scene was cut.
• The following scenes cannot be divided:
- Video snapshot scenes and other scenes that are too short (less than
3 seconds).
- Scenes that were edited using the supplied software
ImageMixer 3
SE
and were then written back to the memory.
• Scenes cannot be divided within 1 second from the beginning or the
end of the scene.
[Edit]
(
[Divide]
[
,
Divide]
(
[Yes]
!"
#$
100
!
Photos
Photos
Refer to this chapter for details on taking photos (advanced
shooting functions), viewing photos and printing them. For
details about basic photo shooting, refer to
Dual Shot Mode
(
"
42).
Basic Playback
Viewing Photos
1 Press
4
.
2 Open the [Photos] index screen, if it is not displayed.
3 Look for the photo you want to play back.
Move the zoom lever toward
;
to show 15 photos per page; move it
toward
<
to show 6 photos per page.
Operating modes:
[
!
]
(
[Photos]
!"
#$
