background image

9-16

Messages List

Adding/

Editing/

Deleting the 

Storage 

Server

You cannot assign this name to a Storage 
Server.

An attempt was made to register a Storage 
Server by specifying a loop back host/
address ("local host", "127.0.0.1" or 
"localhostlocaldomain"). 

This storage server has already been 
added. Please check your settings and try 
again.

An attempt was made to add a Storage 
Server that has been already registered.

The Master Storage Server cannot be 
edited.

An attempt was made to edit the Master 
Storage Server.

Please save or discard your changes 
before changing your Storage Server 
settings.

An attempt was made to change/delete the 
Storage Server while there are camera 
server settings that have not been saved.

The Master Storage Server cannot be 
deleted.

An attempt was made to delete the Master 
Storage Server.

The storage server host name is invalid. 
Please specify a valid host name or IP 
address.

The host name or IP address was invalid 
when [

OK

] was pressed.

The storage server port is invalid. Please 
specify a value between 1 and 65535.

The port number was invalid when [

OK

was pressed.

The Storage Server host name cannot be 
blank.

An attempt was made to add or edit a zone 
in the Storage Server without entering the 
name.

Adding/Editing 

a Location and 

Zone

A location with this name already exists. 
Please use a different name and try again.

An attempt was made to register a location 
name that is already registered.

A location cannot have an empty name. 
Please specify a name and try again.

An attempt was made to register a location 
without entering the name.

This location has zones in it. Please remove 
these before deleting the location.

An attempt was made to delete the location 
for which a zone has been added.

Please select a location for this zone

An attempt was made to add a zone while 
the location has not been registered.

A zone with this name already exists in this 
location. Please use a different name and 
try again.

An attempt was made to add a zone with a 
name that has been already registered.

A zone cannot have an empty name. 
Please specify a name and try again.

An attempt was made to register a zone 
without entering the name.

This zone has camera servers in it. Please 
remove these before deleting the zone.

An attempt was made to delete the zone for 
which a camera server has been added.

Messages

Cause

VK-64_SysManual_Ev21.book  16 ページ  2009年3月2日 月曜日 午後1時3分

CO

PY

Summary of Contents for VK-16 v2.1

































































































































































































































































































Reviews: