background image

9-31

Messages List

T

rou
b

lesh

o

o

ting

SMTP Error Codes

HTTP Error Codes

10091

WSAStartup cannot function at this time 
because the underlying system it uses to 
provide network services is currently 
unavailable.

There is a failure on the PC network board.

11001

No such host is known.

The host name in DNS could not be resolved.

11004

The requested name is valid, but no data of the 
requested type was found.

The host name in DNS could not be resolved 
(11004 may occur instead of 11001 in 2003).

Codes

Error Messages

Description

421

<domain> Service not available, closing 
transmission channel

The communication is terminated because the 
mail server stopped.

450

Requested mail action not taken: mailbox 
unavailable

The requested mail process was not executed 
because the mailbox is not available.

451

Requested action aborted: local error in 
processing

The requested execution was canceled 
because an error occurred in the mail server.

502

Command not implemented

The mail server does not support the 
command that was sent.

550

Requested action not taken: mailbox 
unavailable

The request was not executed because the 
mailbox is not available.

Codes

Error Messages

Description

400

Bad Request

When more than 4 Storage Servers are 
connected when a Sony camera is used. This 
is recorded when the operation mode of the 
camera server is mpeg4.

401

Unauthorized

The user authentication or password for 
connecting to the camera server is incorrect.

403

Forbidden

This is recorded when the connection cannot 
be established due to the IP address 
restriction on the camera server side (It may 
also be returned by the proxy server).

500

Internal Server Error

This occurs when the webview server is not 
running even when the HTTP server is running. 
This may also be recorded even during normal 
operation if the camera server is restarted.

502

Bad Gateway

This is recorded when the proxy server 
returned an HTTP 502 error (which occurs 
when the proxy server receives an error from 
the upper proxy).

Codes

Error Messages

Description

VK-64_SysManual_Ev21.book  31 ページ  2009年3月2日 月曜日 午後1時3分

CO

PY

Summary of Contents for VK-16 v2.1

































































































































































































































































































Reviews: