background image

46

This program is distributed in the hope that it will be useful, but WITHOUT ANY 
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS 
FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this 
program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth 
Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an 
interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with 
ABSOLUTELY NO WARRANTY; for details type `show w'.  This is free software, and you 
are welcome to redistribute it under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of 
the General Public License.  Of course, the commands you use may be called something 
other than `show w' and `show c'; they could even be mouse-clicks or menu items--
whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, 
to sign a "copyright disclaimer" for the program, if necessary.  Here is a sample; alter the 
names:

 Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' 
(which makes passes at compilers) written by James Hacker.

 <signature of Ty Coon>, 1 April 1989
 Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary 
programs.  If your program is a subroutine library, you may consider it more useful to 
permit linking proprietary applications with the library.  If this is what you want to do, use 
the GNU Lesser General Public License instead of this License.

Exhibit B

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

 Copyright (C) 1991, 1999 Free Software Foundation, Inc.  51 Franklin Street, Fifth Floor, 
Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim 
copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL.  It also counts as the successor of the 
GNU Library Public License, version 2, hence the version number 2.1.]

Preamble

 The licenses for most software are designed to take away your freedom to share and 
change it.  By contrast, the GNU General Public Licenses are intended to guarantee your 
freedom to share and change free software--to make sure the software is free for all its 
users.

 This license, the Lesser General Public License, applies to some specially designated 
software packages--typically libraries--of the Free Software Foundation and other authors 
who decide to use it.  You can use it too, but we suggest you first think carefully about 
whether this license or the ordinary General Public License is the better strategy to use in 
any particular case, based on the explanations below.

 When we speak of free software, we are referring to freedom of use, not price.  Our 
General Public Licenses are designed to make sure that you have the freedom to distribute 
copies of free software (and charge for this service if you wish); that you receive source 
code or can get it if you want it; that you can change the software and use pieces of it in 
new free programs; and that you are informed that you can do these things.

 To protect your rights, we need to make restrictions that forbid distributors to deny you 
these rights or to ask you to surrender these rights.  These restrictions translate to certain 
responsibilities for you if you distribute copies of the library or if you modify it.

 For example, if you distribute copies of the library, whether gratis or for a fee, you must 
give the recipients all the rights that we gave you.  You must make sure that they, too, 
receive or can get the source code.  If you link other code with the library, you must 
provide complete object files to the recipients, so that they can relink them with the library 
after making changes to the library and recompiling it.  And you must show them these 
terms so they know their rights.

 We protect your rights with a two-step method: (1) we copyright the library, and (2) we 
offer you this license, which gives you legal permission to copy, distribute and/or modify 
the library.

 To protect each distributor, we want to make it very clear that there is no warranty for the 
free library.  Also, if the library is modified by someone else and passed on, the recipients 
should know that what they have is not the original version, so that the original author's 
reputation will not be affected by problems that might be introduced by others.

 Finally, software patents pose a constant threat to the existence of any free program.  We 
wish to make sure that a company cannot effectively restrict the users of a free program 
by obtaining a restrictive license from a patent holder.  Therefore, we insist that any patent 
license obtained for a version of the library must be consistent with the full freedom of use 
specified in this license.

 Most GNU software, including some libraries, is covered by the ordinary GNU General 
Public License.  This license, the GNU Lesser General Public License, applies to certain 
designated libraries, and is quite different from the ordinary General Public License.  We 
use this license for certain libraries in order to permit linking those libraries into non-free 
programs.

Summary of Contents for WU10


























































Reviews: