Appendix: Menu Options Lists
125
* The default settings are as follows. [Assign Button 1]: [
AF/MF], [Assign Button 2]: [
z
PRE REC],
[Assign Button 3]: [
j
Off], [Assign Button 4]: [
j
Off], [Assign Button 5]: [
Rec Review].
** Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.
[LCD Brightness]:
Adjusts the brightness of the LCD screen.
• Changing the brightness of the LCD screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
[LCD Backlight]/[Viewfinder Backlight]:
Sets the screen to one of three brightness levels (for the LCD
screen) or two brightness levels (for the viewfinder).
• Changing the brightness of the screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
• Using the [
H
Bright] setting will shorten the effective usage time of the battery pack.
[LCD Mirror Image]
: When this setting is set to [
i
On], this function reverses the image on the screen
horizontally when you rotate the LCD panel 180 degrees toward the subject. In other words, the
screen will show a mirror image of the subject.
[Notification Sounds]:
A beep will accompany some of the camcorder's operations.
• While pre-recording (
A
85) is activated, the camcorder will not emit any notification sounds.
[Tally Lamp]:
Activates the tally lamp when the camcorder is recording, the battery level is low or a
memory card is full. When set to [
j
Off], the tally lamp will not turn on in these cases. The tally lamp
is located on the handle unit so make sure you attach it to the camcorder in advance.
[Powered IS Button]
:
Determines the operation mode of the assignable button set to [
È
Powered IS]
(
A
56).
[
Î
Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[
Ï
Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
[Set WB Priority]
:
Convenient for times when you need to use a particular white balance setting
frequently. You can press an assignable button set to [
Ä
WB Priority] to switch between the current
white balance and the white balance setting selected for [Set WB Priority].
[Focus Ring Direction]
:
Changes the direction the focus/zoom ring needs to be turned. This setting
affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is
set to FOCUS).
[Focus Ring Response]
:
Selects the sensitivity of the response when operating the focus/zoom ring.
This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom
ring switch is set to FOCUS).
[Focus Preset Speed]
:
Determines the speed at which the focus changes to the preset position.
[Battery Info]:
When you are using a battery pack that is compatible with Intelligent System, this option
displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time (
mode) or playback time (
mode).
• If the battery pack is exhausted, the battery information may not be displayed.
[Reset All]
[No], [Yes]
z
z
z
–
Menu item
Setting options
A
y
}
