Web Camera Function
84
Web Camera Function
You can connect the camcorder to a computer using a USB cable, and use the camcorder as a web
camera (with compatible software). Only video can be recorded while using this function. For more
details about supported operative systems or software tested for use with the camcorder, visit your
local Canon website. For more details, refer to the computer’s and the USB cable's instruction
manuals.
Video output configuration
* MP4 format only
1 Select the video configuration (
A
2 Select
>
[
B
System Setup] > [USB Mode] > [
Video Output (UVC)].
3 Connect the camcorder to a computer.
• Video will be displayed on the software in use.
4 Open the desired compatible software on the computer.
5 When the connection ends, disconnect the USB cable from the camcorder.
NOTES
• Audio is not output.
• This function cannot be used while shooting photos.
Operating modes:
Video format
Resolution
Frame rate
Motion JPEG
1920x1080
1280x720*
30 fps (maximum)
USB terminal
Commercially available USB cable or
IFC-100U/IFC-400U Interface Cable
(optional)
Computer