background image

Operating instructions:

 

Before placing your new appliance into operation please read these operating instructions carefully.  

 

1. Read the instructions -all safety information and instructions should be read before using the appliance.  

2. Please keep these operating instructions for futurereference.  

3. Follow the instructions -all the security and user instructions should be followed.  

4.  Water  and  moisture  –the  CD1.10should  not  be  placed  near  water,  for  example  near  baths,  swimming  pool, 
kitchen sink, etc..  

5. Accessories -do not useaccessories not recommended by the manufacturer.  

6. Location -do not place equipment on unstable surface.The device may fall, which maycause serious injuries to 
children or adults, as well as damage to the appliance. Use only padsor stands recommendedby the manufacturer 
or sold to dealers at the same time with this device. Any location of the device should be in accordance with the 
manufacturer's instructions and only accessories recommended by the manufacturer should be used.  

7.  Ventilation  –appliance  should  be  placed  in  aplace  whichguaranteesaproper  airflow.  This  means  that  it  must 
not  lie  on  the  sofa  or  upholstered  furniture.  When  in  operationit  must  not  be  covered.  It  would  then  prevent 
proper airflow around the vent holes of device.  

8. Heat -ensure the appliance is away from any sources of heat(direct sunlight, electric stove, etc.).The  distance 
from the rear wall of the device may not be less than 20 cm, and 20 cm above the area of the compact disc player 
may notbe anyobstacle. Alongside the equipment should be ensured min. distance of 20 cm from other objects. 

9. Power source -the device must be connected only to apower supply, for which it is designed.  

10.  Power  cord  -it  is  necessary  to  pay  particular  attention  to  apower  cord,it  must  be  positioned  so  as  to  avoid 
stepping on it and to ensure it is protected against mechanical damage.  

11. The longer the period during whenyou do not use theCD1.10you should disconnect the power cord from the 
mains supply, or at least turn off the main power switch located on the back.  

12. Subjects containing liquid -do not place these objects (vases, flower pots), so that they can fall on the device, 
possibly a fluid could leak out of them on the appliance. 

13. Damage requiring service -equipment should be repaired only by qualified service  once:  

a) power cord is damaged 
b) the device fell into water or was poured  
c) the device was exposed to rain  
d) the device works incorrectly   
e) the device fell to the ground or is otherwise mechanically damaged.  

14. Repairs -all repairs must be entrusted to qualified service.  

15. General warning -use the device only in accordance with the instructions. 

 

The manufacturer declines any liability should these safety measures not be observed. 

To help you avoid an electric shock, do not expose the CD player to rain or moisture! 

This CD player is classified as CLASS 1 LASER PRODUCT. It can emit radiation in CLASS 1 limit range. 

Do not disassemble / danger of damage to eyes!

 

 
Delivery content:

 

1.shipping packaging 
2. CANOR CD1.10 compact disc player / DA converter  
3. Power cord  
4. Remote control (containing AAA batteries -2 pcs)  
5.CANOR CD1.10 compact disc player user guide 
6. CD disc with USB driver for PC (USB Audio Driver) 

Summary of Contents for CD 1.10












Reviews: