The UltraDash C1 can be connected to most external video equipment that utilizes
standard RCA Inputs. You will need to purchase the AV Cable in order to continue this
process.
Visit https://cansonic.com to purchase the correct AV Cable.
Connect the AV Cable to your UltraDash C1 and the external device. Once you have
done so, turn on the UltraDash C1 and the external device. The UltraDash C1’s screen
will appear blank as the image is shown on the external device.
The LED light shows the UltraDash C1 is on.
Remember to charge the UltraDash C1 prior to AV OUT mode since the AV cable will
NOT charge the device. Please the supplied USB cable and a standard 5Vdc/USB
power adaptor to keep it charged.
Note:
Be sure that the external power source of the power adaptor is 5Vdc output in
order to avoid damage to the UltraDash C1.
This damage is not covered under the manufacturer’s warranty.
VIDEO & AUDIO OUTPUT (OPTIONAL)
28
