7
4. VERIFY THE INSTALLATION
1. Power up the vending machine and observe the LEDs of the G10-S Telemeter.
When the green LED blinks, the Telemeter has initialized.
2. Once the Telemeter has initialized the LTE Modem and connected to the wireless
network, the Card Reader’s display should read “Swipe or Tap To Begin. “
3. At this point you can perform a test vend with a USA Technologies Pass Card or
credit card.
4. We recommend recording the ePort G10-S Telemeter serial number and vending
machine ID for accounting purposes.
5. Contact USAT Customer Care if you have any questions – 888-561-4748.
You must have a signed ePort Connect Services Contract and bank account as-
signed to this device for it to be able to accept credit card transactions. Please
call USA Technologies Customer Care at 888-561-4748, if you need activation
documents.
DEX Cable
Card Reader
Cable
MDB Cable
FIGURE 7 G10-S TELEMETER CABLES
