CanTech
6
After completing the reset, change text “Performing Reset“ to “Reset done”
2.3 Measurement settings
Select value : select the value with which to work
Text : description of value – maximum 24 symbols
Serial number : number of the thermometer
-
if it is used only one thermometer, a value is empty
-
when using multiple thermometers, each must have its own address. The number can be entered
manually or provided that, they are connected gradually (only one), number can be loaded using
the button „Load number“
Measure : determines if a value is in a given position measure
Trap error : fail measurement trap is sent
Mail error : fail measurements are sending mail
Dec.places : how many decimal places the value is displayed
Unit : unit of display values
Watch limits : it determines whether to watch, if the value in the specified limits
Trap : sends the trap when limits are exceeded
Mail : mail will be sent when limits are exceeded
Output : determines the output, that is activated when limits are exceeded, INV behind the name
indicates that the output will be negated
Min, Max, Hysteresis : settings of watched limits