SRS-12H MANUAL
Chapter 3: Operation
14
In the case of sawblade removal, the user has to raise the saw arbor slightly at first
(same as the step 3). Raise the saw arbor for
3-5mm
so that the sawblade teeth may
not be damaged while removal. Then loosen the hex. bolt of sawblade.
3-2 CHECKING SAFETY DEVICES
1)
Close the saw arbor cover, check and make certain all limit switches and the
lateral safety guard are at the functional position. And, the top anti-
kickback fingers hang down in a row and point to the direction of feed chain,
also, can be lifted up smoothly. The bottom anti-kickback fingers can be
pressed down and lifted up smoothly when the fence moving on the table.
2)
Make sure the electricity power is connected and the “power-on indicator”
lights up. Also, the emergency stop button does not be pressed.
Summary of Contents for C12RSH
Page 5: ......
Page 9: ...SRS 12H MANUAL Chapter 1 Introduction 4 1 3 LOCATION OF PARTS...
Page 12: ...SRS 12H MANUAL Chapter 1 Introduction 7 Machine size...
Page 37: ......
