SRS-12H MANUAL
Chapter 5: MAINTENANCE & REPLACEMENT
29
(2) 5-Step Speed:
Please refer to Page 22 of 5-Step Speed adjustment for the replacement of new belt
(check the “SPECIFICATIONS” chapter of the manual for the specifications of belt).
5-5 ADJUST THE OIL SUPPLY TO FEED CHAIN
This machine is designed with an auto-lubrication system to supply necessary
lubricant for feed chain and guide track. There are 2 types of lubricators available
for this machine: “Electric lubricator” and “Mechanical lubricator (Option)”.
~
Electric lubricator: It adopts the method of periodic lubrication to output a certain
volume of oil every 5 minutes.
~
Mechanical lubricator: The volume of oil output follows the feed speed by means
of a crank coupling. The faster of feed speed, the quicker of oil output. On the
contrary, oil output will be slower.
* Adjustment method:
(1) Electric Lubricator:
MIN : Showing the interval between two lubrications (unit: minute).
SEC : Showing the lubrication time (unit: second).
INT : This is to set the interval between two lubrications (9~99 minutes).
It has set at 3 minutes at our factory.
DIS : This is to set the duration of each lubrication (discharge time: 0~99 seconds).
It has set at 5 seconds.
FEED : Compulsory lubrication (discharge oil manually).
RST : Recount the interval time after compulsory lubrication.
Summary of Contents for C12RSH
Page 5: ......
Page 9: ...SRS 12H MANUAL Chapter 1 Introduction 4 1 3 LOCATION OF PARTS...
Page 12: ...SRS 12H MANUAL Chapter 1 Introduction 7 Machine size...
Page 37: ......
