VistaCool™ Direct-to-Drain Cooling System
for Autoclave Wastewater
System Model #
V7601
Install Date
System Serial #
Dealer
Installer Name
Dealer Phone
Installer Phone
Dealer Address
Notes
System Information
Thank you for choosing the VistaCool™ Direct-to-Drain Cooling System for Autoclave Wastewater for your
practice! The following chart is for necessary information for future reference. Please fill it out completely
and keep this manual in a convenient place for ready access and reference.
Be sure to use our convenient online warranty registration form at
vrg.support/register
. If you’d prefer,
you may complete and return the included “Warranty Registration” sheet. Make a copy of the form for your
records, then mail the original to us.
(888) 276-7783
crosstex.com
During the time period and subject to the conditions
hereinafter set forth, Crosstex International, Inc. (Crosstex)
will repair or replace to the original user any portion of a
system which proves defective due to defective materials
or workmanship of Crosstex. Contact your nearest
authorized Crosstex distributor/dealer for warranty
service. At all times Crosstex shall have and possess the
sole right and option to determine whether to repair
or replace defective equipment, parts, or components.
Damage due to conditions beyond the control of Crosstex
is NOT COVERED BY THIS WARRANTY. (Contact parcel or
freight company for claims on freight damaged in transit)
WARRANTY PERIOD:
Crosstex shall warrant its
VistaCool™ Direct-to-Drain Cooling System for Autoclave
Wastewater for a period of one (1) year from the date
of installation, or eighteen (18) months from the date of
manufacture, whichever comes first. Filtration elements
subject to varying types of water conditions are not
warranted for performance due to fouling by local water
conditions, but are warranted for defects in materials and
workmanship.
LABOR, ETC., COSTS:
Crosstex shall IN NO EVENT be
responsible or liable for the cost of field labor or other
charges incurred by any customer in removing and/
or re-affixing any Crosstex product, part or component
thereof.
THIS WARRANTY WILL NOT APPLY:
(a) To defects or
malfunctions resulting from failure to properly install,
operate or maintain the unit in accordance with printed
instructions provided; (b) to failures resulting from abuse,
accident or negligence; (c) to normal maintenance
services and the parts used in connection with such
service; (d) to units which are not installed in accordance
with applicable local codes, ordinances and good
trade practices; (e) if the unit is moved from its original
installation location, or; (f) if the unit is used for purposes
other than for what it was designed and manufactured.
RETURN OF REPLACED COMPONENTS:
Any item to be
replaced under this Warranty must be returned to Crosstex
in Phoenix, Arizona, or such other place as Crosstex may
designate, freight prepaid. Write to the address listed
below for a return authorization and the physical address
to which items should be returned for warranty attention.
PRODUCT IMPROVEMENTS:
Crosstex reserves the
right to change or improve its products or any portions
thereof without being obliged to provide such change or
improvement of units sold and/or shipped prior to such
change or improvement.
WARRANTY EXCLUSIONS:
As to any specific Crosstex
product, after the expiration of the time period of the
warranty applicable thereto as set forth under the
heading “Warranty Period” above, THERE WILL BE NO
WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE.
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not
apply to you. No warranties or representations at any
time made by any representative of Crosstex shall vary or
expand the provisions hereof.
LIABILITY LIMITATION:
IN NO EVENT SHALL CROSSTEX
BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL,
INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR
RELATED IN ANY MANNER TO ANY CROSSTEX PRODUCT
OR PARTS THEREOF.
Some states do not allow the exclusion of limitation
of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
This Warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
For your warranty protection (Magnason-Moss Warranty
Act), the warranty card, if provided, should be completed
and returned to Crosstex within ten (10) days of
installation. Alternatively, register your product online
within ten (10) days of installation at vrg.support/register.
In the absence or other suitable proof of installation date,
the effective date of this warranty will be based upon the
date of manufacture plus one hundred eighty (180) days.
Direct all notices, etc. to:
Service Department
Crosstex International, Inc.
1733 W. Parkside Lane
Phoenix, AZ 85027
(800) 531-2221
Limited Warranty
Made in USA
Part No. VM1065 / REV B - 01/2020
All product names are trademarks of Crosstex International, Inc., a Cantel Medical Company, its affiliates or related companies, unless otherwise noted. VistaCheck™ is a trademark
of Vista Water Group, LLC. STAT
IM
®
is a registered trademark of SciCan Inc. Teflon™ is a trademark of The Chemours Company FC, LLC. KYNAR
®
is a registered trademark of
Arkema, Inc. Marks not registered in all jurisdictions.
© 2020 Crosstex International, Inc.
Crosstex International, Inc.
1733 W. Parkside Lane, Phoenix, AZ 85027 USA
