CANTERBURY Z3460 Quick Start Manual Download

Page: 5 / 8

Installation Instructions Model : Z3460

Further information Phone (03) 9761 4603 sales@sinkandtap.com.au

❹



Carefully raise the leaver dome handle

, ensuring that the opening clears the

nut cover ring and allowing access for
inserting the M6 x 6 grub screw,

Note :

Use a correctly sized hex Allen key to

feed the grub screw through the access hole
into position.

❹



Carefully install the dome handle

, onto

the mixer cartridge leaver.

Note:

Ensure that the cartridge leaver is

correctly seated in the leaver handle slot.

Continue……..

Summary of Contents for Z3460

Page 1: ...mpliant to AZ NZS 3718 Suitable for even and uneven pressure Handles are interchangeable Specifications WM22315 AS NZS3662 Canterbury Sink Tap Co Max Min Operating Pressure 100 500kPa Further information Phone 03 9761 4603 sales sinkandtap com au Available replacement handles 75 El Capitan 76 Mont Blanc 76A M Blanc Crackle 76B M Blanc Black 33 Swarovski Crystal ...

Page 4: ...ert knob Ensure that the cover plate is positioned all the way and firmly against the finished or tiled wall surface 4 Slide the cover pipe 5 over the outer surface of the mixer body Fit the nut cover ring 6 securely in the cover pipe by pressing it down firmly into its correct seating position The O ring on the cartridge nut should hold the nut cover ring in position Continue ...

Page 5: ...he opening clears the nut cover ring and allowing access for inserting the M6 x 6 grub screw 9 Note Use a correctly sized hex Allen key to feed the grub screw through the access hole into position 5 Carefully install the dome handle 8 onto the mixer cartridge leaver Note Ensure that the cartridge leaver is correctly seated in the leaver handle slot Continue ...

Page 7: ...Spare Parts list Model Z3460 Further information Phone 03 9761 4603 sales sinkandtap com au 7 ...