3
55
English
When the device is supplied all the physically existing inputs are provided with a source designation� These are as follows: ARC = TV;
HD1 =BDP; HD2 = SAT; HD3 = PS; COX = DVD; OPT = CD; AUX = VCR; BT = Bluetooth
®
� You can configure the names allocated to the
various inputs to suit your source device�
To configure the designation proceed with the following steps:
1
With the device switched on press and hold one of the two “Input” keys for
more than 3 seconds until
INP
appears on the display�
2
Now press one of the two “Input” keys briefly to select the desired physical
input (ARC, HD1, HD2, etc�)�
3
Now press one of the “Volume” keys briefly to select the desired designation�
You can choose from the following predefined designations:
“---” (Input deactivated), TV, BDP, SAT, CD, DVD, CAM, REC, PAD, POD, TAB,
TUN, DAB, PS, VCR�
4
To allocate a designation to an additional input, repeat steps 2 and 3�
5
Exit the menu by pressing and holding one of the two “Input” keys again for
more than 3 seconds� If no input is received within 10 seconds the device will
automatically leave the configuration menu�
Note:
Inputs that have been deactivated “---” will no longer be shown when scrolling
through the inputs (input key)� This makes it easier to select the desired input�
Comment:
The designation for the BT input cannot be changed� If you would have deactivated all inputs, BT (Bluetooth
®
)
will remain as fixed input�
Configurating the input (INP)
ON
STANDBY
MUTE
TV remote control
Summary of Contents for C 500 Aktiv
Page 33: ...31 English C 5 0 0 A k t i v...
