3
101
English
HDMI® Output
ARC
[ARC]
TV
(Television)
Optical Digital Input OPT
[OPT]
CD
(CD Player)
Coaxial Digital Input COAX
[COA]
DVD
(DVD Player)
Analoque Line Input Analog [ANA]
AUX
(Analogue Device)
To change the name of an input or to deactivate an input please proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
3
Use the
" "
or " " button to select the menu item Input Config [INP] and confirm with the "OK" button.
4
Use the
" "
or " " button to select the desired input and confirm with the "OK" button.
5
Select the desired source name by using the
" "
or " " button . You can choose from the following predefined designations:
“- - -” (input disabled), TV, BDB, SAT, CD, DVD, CAM, REC, PAD, POD, TAB, TUN, DAB, PS, VCR, ATV, PC, AUX. After selecting the
name exit the input item by pressing the "OK" button.
6
To assign a name to another input, repeat steps 4 and 5.
7
To leave this menu item, press the "M" button.
Notes:
•Should you assign a name to an input that is already assigned, the input previously assigned with this name will be deactivated (“- -
-“). To continue using this input, you must assign a different name. Each source name can be assigned only once.
•Inputs which have been deactivated (“- - -”) are no longer displayed when selecting the inputs.This simplifies the selection of the
desired input.
•The name for the input BT (Bluetooth®) and NET (Network) cannot be changed.
Analog Gain [OFS]
With this function you can adjust the signal gain of the analogue Line input [AUX] relating to that of the digital source(s) in a range from
-6dB to +6dB. You may use this function to balance the volume levels. 6dB doubles (+6dB) resp. halfs (-6dB) the output gain of your playback
source.
For setting the offset volume level, proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
3
Select the menu item Analog Gain [OFS] using the " " or " " buttons and confirm with the "OK" button.
