110
English
transmission power is at 50% (-3dB) and at Max at 100% (0dB).
To adjust the transmission power of the wireless audio module please do as follows:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
3
Use the
" "
or " " button to select the item Transmission Power [TXP] and confirm with "OK".
4
Select the desired transmission power using the "+" or "–" key and confirm your selection by pressing "OK".
ECO = 25% (-6dB) Medium = 50% (-3dB) Max = 100% (0dB).
5
Press the "M" button to exit this menu item.
RF Channel [CHN]
Usually the wireless audio module of the Amp 5.1 choses a free radio channel in the 5.2GHz resp. 5.8GHz band automatically (AUTO /
[AUT]). In case you use your WiFi in the 5GHz band too and dropouts in the audio transmission occur, this gives you the option to set the
radio frequency of the wireless audio module to a specific channel.
If you select a different specific channel for your WiFi-router too, interferences and dropouts should no longer occur.
The selected frequency for the Amp 5.1 and the router should ideally be as far apart as possible. The Amp 5.1 uses the following radio chan-
nels:
• 5.2GHz Band: 5.2G-1 = 5180MHz 5.2G-2 = 5210MHz 5.2G-3 = 5240MHz
• 5.8GHz Band: 5.8G-1 = 5736MHz 5.8G-2 = 5762MHz 5.8G-3 = 5814MHz
To set the radio channel of the wireless audio module to a fix channel or to automatic selection please do as follows:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
3
Use the
" "
or " " button to select the item RF Channel [CHN] and confirm with "OK".
4
Select the desired radio channel (see above) using the "+" or "–" key and confirm your selection by pressing "OK".
5
Press the "M" button to exit this menu item.
Wireless Reset [WRE]
This functions allows you to delete all stored settings and paired Smart speaker and/or Smart subwoofer (slave speaker) connections of the
wireless audio module of the Amp 5.1 and in this way reset the wireless module.
Caution:
All settings and paired Smart speakers / Smart subwoofer that have been made according to the wireless audio module in the
Amp 5.1 will be deleted.
