3
35
English
Language [LAN]
With this option you can change the On-Screen display (OSD) language from German to English and backwards.
To change the (menu)language please do as follows:
1
To enter the menu, press the "
M
"
button on your remote control.
2
Use the " " or " "
button
to navigate to the menu
System Setup [SYS]
and confirm with the "
OK
"
button
.
3
Use the " " or " "
button
to select the menu item
Language [LAN]
and confirm with the "
OK
"
button
.
4
Select the wanted language English or German using the "
+
" or "
-
"
key
.
5
Then press
"OK"
again to leave the menu.
Playmode [PLM]
In this menu you can activate additional playmodes that can then be used and selected in addition to the 3 standard playmodes Stereo, Movie
and Music with the Play Mode button. These playmodes are:
• Discrete [DCT]:
Surround sound for movies, music, etc. without a virtualizer.
• Night [NGT]:
(Virtual) surround sound with reduced dynamic and higher voice clearity at low volume levels for "night usage".
• Party [PTY]:
Plays the front channels (L+R) additionally on the surround speakers.
To activate or deactivate an additional playmode please do as follows:
1
To enter the menu, press the "
M
"
button
.
2
Use the
" "
or " "
button
to navigate to the menu
System Setup [SYS]
and confirm with the "
OK
"
button
.
3
Use the
" "
or " "
button
to select the menu item Playmode [PLM] and confirm by pressing "OK".
4
Select the desired playmode by using the " " or " " button and press "OK".
5
Activate (ON / [ON]) resp. deactivate (OFF / [OFF]) the selected playmode with the "
+
" or "
–
"
button and exit this playmode by
pressing "OK".
6
To activate or deactivate a different playmode please repeat the steps 4 and 5.
7
Press the "
M
"
button
to exit this menu item.
Note:
The playmodes Discrete and Party are only selectable if Smart (wireless-)speaker are connected to the Sounddeck 100.
You can find additional information in the description in the "Sub Out" and "Wireless Pairing" part.
