3
37
English
3
Confirm the first item
Network Select [NWC]
with the "
OK
"
button
.
4
Select the desired connection way using the "
+
" or "
-
"
key, [WIF] for a wireless resp. [ETH] for a wired network connection
and confirm
with the "
OK
"
button
.
5
Press the "
M
"
button
to exit this menu item.
Network Reset [NWR]
This function is to reset all network settings stored on the Sounddeck 100.
Caution:
All settings you have made and stored on the Sounddeck's WiFi module will be deleted!
To perform the reset please do as follows:
1
Power up the Sounddeck 100 by pressing
the Power button
" " on the remote.
2
To enter the menu, press the "
M
"
button
.
3
Use the
" "
or " "
button
to navigate to the menu
Network Setup [NWS]
and confirm with the "
OK
"
button
.
4
Use the
" "
or " "
button
to select the funktion
Network Reset [NWR]
and confirm with the "
OK
"
button.
The menu shows the Net-
work Reset menu and "No" is selected, the display shows
[NO].
5
If you want to cancel the reset precedure, press
"OK"
, or press the menu key "
M"
.
6
If you want to perform the reset, select "Reset all" using
" "
or " "
key
and press
"OK"
. The display shows [YES].
7
The OSD shows “Please Wait”, the display still shows [YES]
.
After the reset-process (ca. 30-40 seconds) the Sounddeck 100 goes back
into normal mode. The WiFi module reboots. During the starting process the LED flashes green rapidly.
4. Wireless Setup [WIS]
The fourth item of the Main Menu is the Wireless Setup which is used to set-up both the wireless speaker connection and the Bluetooth
®
wi-
reless technology. It contains the items:
• Wireless Pairing [WSP]
• Wireless Reset [WRE]
• Transmission Power [TXP]
• RF Channel [CHN]
