42
English
BT Select [BTS]
When this function is set to
Auto [AUT]
, the Sounddeck 100 automatically switches to the BT input whenever it detects an audio signal
from the (mobile) device. If this function is deactivated and set to
Manual [MAN] (factory default)
, the input must be selected manually.
To activate / deactivate this function please proceed as follows:
1
To enter the menu, press the "
M
"
button.
2
Use the
" "
or " "
button
to navigate to the menu
Wireless Setup [WIS]
and confirm with the "
OK
"
button
.
3
Use the
" "
or " "
button
to select the menu item
Bluetooth [BT]
and confirm with the "
OK
"
button
.
4
Use the " " or " " button to select the menu item
BT Select [BTS]
and confirm with the "
OK
"
button
.
5
Select the wanted parameter
[MAN]
resp.
[AUT]
using the "
+
" or "
-
"
key
.
6
Press the "
M
"
button
to exit this menu item.
Notes:
•
Depending on the (mobile) device used, with this function set to Auto [AUT] the Sounddeck may also switch to the BT input
when typing a message or when other system tones occur. A time delay of 5 seconds is programmed to avoid continuous
switching (e.g. on arrival of a message).
•
If the BT Select function is activated [AUT], the BT input cannot be selected via the input buttons
" "
or " " any longer.
•
If the function "BT Select" is activated [AUT], the Sounddeck 100 can be paired with a (mobile) device at any time,
regardless of the selected signal input.
BT Reset [BRE]
This function is to reset all Bluetooth
®
wireless technology relating settings stored on the Smart Sounddeck 100.
Caution:
ALL settings you have made and stored on the Sounddeck regarding the BT audio module will be deleted.
To perform the reset please proceed as follows:
1
To enter the menu, press the "
M
"
button.
2
Use the
" "
or " "
button
to navigate to the menu
Wireless Setup [WIS]
and confirm with the "
OK
"
button
.
3
Use the
" "
or " "
button
to select the menu item
Bluetooth [BT]
and confirm with the "
OK
"
button
.
4
Use the " " or " " button to select the menu item
BT Reset [BRE]
and confirm with the "
OK
"
button
.
The menu BT Reset is displayed and the status indication shows "No", the display shows [NO].
5
If you want to cancel the reset precedure, press
"OK"
, or press the menu key "
M"
.
6
If you want to perform the reset, select "Reset all" using
" "
or " "
key
and press
"OK"
. The display shows [YES].
