12
AIR
GB
Fig.7
Fig.8
Fig.9
OPERATING INSTRUCTIONS
1. Speed is controlled by the Piano switch:
0
à
Off 1
à
Low 2
à
Medium 3
à
High
2. To start/stop fan oscillation. Push down/pull up the clutch knob.
3. To adjust the air flow upward or downward, push the grilles gently in the desired direction.
4. The height of the fan can be adjusted by loosening the height adjustment ring, carefully
raising or lowering the fan and firmly re-tightening the height adjustment ring.
GRILL & FAN BLADE ASSEMBLY
1. Unscrew the spinner clockwise (or take the spinner out of the bag) and the plastic nut coun-
terclockwise to remove both of them. Fix the rear grill to the motor then tighten the plastic nut
again. (Fig. 7)
2. Slide the blade on to the shaft, and make sure the rotor shaft pin is fitted into the groove in
the blade. Turn the spinner counterclockwise to tighten the blade. (Fig. 8)
3. Fasten the front grill and the rear grill with the grill clip and then tighten the fan grill locking
screw and nut. (Fig. 9)
CLEANING
1. Make sure the fan is unplugged from the power socket before cleaning.
2. Plastic parts should be cleaned with a soft cloth moistened with a mild detergent. Thoroughly
remove the detergent film with a dry cloth.
