36
Mode
Fan
Timer
Timer
Follow
me
LED
Self
clean
Turbo
ON/OFF
EN
FUNCTION BUTTONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The following is a brief introduction to
the remote control itself. For instructions on how to operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of
this manual.
ON/OFF
Turns the unit on or off
FAN
Selects fan speeds in the following order:
AU%
➝
20%
➝
60%
➝
40%
➝
80%
➝
F% (100%).
Press the Adjust
or
button to
increase/decrease the fan speed in
1% increments.
TEMP +
Increases temperature in 0.5°C (1°F)
increments. Hold down this button to
increase temperature in 1°C (1°F) incre-
ments. Max. Temperature is 30°C (86°F).
TEMP –
Decreases temperature in 0.5°C (1°F)
increments. Hold down this button to
decrease temperature in 1°C (1°F) incre-
ments. Min. temperature is 16°C (60°F).
SWING
Starts and stops horizontal
louver movement.
SWING
Starts and stops vertical
louver movement.
SELF CLEAN
Starts and stops the unit
self clean feature.
ECO/SLEEP
Starts and stops energy efficient feature.
If hold down this button for more than
2 seconds, the sleep feature is activated.
TIMER/SLEEP
Sets timer to turn unit on and off (see for
instructions) How to Use Basic Functions.
LED
Turns indoor units
LED display on and off.
FOLLOW ME
Press the button to activate /
deactivate FollowMe function or to
display the room temperature.
TURBO
Enables unit to reach preset
temperature in shortest possible time.
INTELLIGENT EYE
Detects the people
activities in the room.
ON/OFF
Scrolls through
operation modes as follows:
AUTO
➝
COOL
➝
DRY
➝
HEAT
➝
FAN