50
Page 10
+/- 1 C/2 F
+/- 1 C/2 F
Page 10
+/- 1 C/2 F
+/- 1 C/2 F
Page 10
+/- 1 C/2 F
+/- 1 C/2 F
EN
SLEEP OPERATION
The SLEEP function is used to decrease energy use while you sleep
(and don’t need the same temperature settings to stay comforta-
ble). This function can only be activated via remote control.
Press the
SLEEP
button when you are ready to go to sleep. When
in COOL mode, the unit will increase the temperature by 1°C
(2°F) after 1 hour, and will increase an additional 1°C (2°F) after
another hour. When in HEAT mode, the unit will decrease the
temperature by 1°C (2°F) after 1 hour, and will decrease an addi-
tional 1°C (2°F) after another hour. And the fan speed is low.
It will hold the new temperature for 6 hours, then the sleep
operation stops, the unit will revert back to the previous operation
mode, but the temperature will not change.
NOTE:
The SLEEP function is not available in FAN or DRY mode.
Set
temperature
8 hours
cancel sleep
operation
Saving energy during sleep