61
SPESIFIKASJONER
NO
FORKLARING AV DISPLAYKODER
Frontpanel
Luftspjeld
Nettledning (gjelder ikke alle enheter)
Sensor
(gjelder ikke alle enheter)
Fjernkontrollholder
(gjelder ikke alle enheter)
Display
Enheten har en innebygd lyssensor for å de-
tektere omgivende lysstyrke. Når lyset slås av,
dimmes displayet gradvis ned for å spare strøm
og gi deg en behagelig søvn.
Fjernkontroll
Catalyst filter
(foran hovedfilteret – gjelder ikke alle modeller)
I Viftemodus viser enheten romtemperaturen.
I andre modi viser enheten temperaturinnstillingen din.
Trykk på LED-knappen på fjernkontrollen for å slå av displayet.
Trykker du på LED-knappen en gang til, vises romtemperaturen. Et tredje trykk viser gjeldende driftseffekt,
og et fjerde trykk gjør at displayet viser innstilt temperatur.
- Viser temperatur, driftsfunksjon og feilkoder:
- i 3 sekunder når:
• TIDSUR PÅ er stilt
• Funksjonene FRISK, SVING, TURBO eller STILLE er valgt
- i 3 sekunder når:
• TIDSUR AV er stilt
• Funksjonene FRISK, SVING, TURBO eller STILLE er slått av
- når kaldluftbeskyttelsesfunksjonen er slått på
- ved avriming
- når enheten utfører selvrens
- når 8 graders oppvarmingsmodus er slått på
- når ØKO-funksjonen er aktivert (gjelder ikke alle enheter)
- når funksjonen for trådløs fjernkontroll er aktivert (alternativ)
- Indikerer gjeldende driftseffekt
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.
Page 6
Unit Specifications and Features
1
Unit
Specifications
and Featu
res
NOTE:
A guide on using the infrared remote is not included in this
literature package.
Unit Parts
“ ” for 3 seconds when:
• TIMER ON is set
• FRESH, SWING, TURBO, or SILENCE features are turned on
“ ” for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
“ ” when defrosting
“ ” when anti-cold air feature is turned on
“ ” when unit is self-cleaning(some units)
“ ” when 8 degree heating mode is turned on(some units)
“ ” when fresh feature is turned on(some units)
“ ” when ECO feature is activated(some units)
“ ” when wireless control feature is activated(some units)
“ ” Indicates the current operation power
Display Code
Meanings
In Fan mode, the unit will display the room temperature.
In other modes, the unit will display your temperature setting.
“ ” Displays temperature, operation feature and Error codes:
Power Cable (Some Units)
Remote Control
Intelligent eye
(some units)
Remote Control
Holder (Some Units)
Functional Filter
(On Front of Main Filter - Some Units)
Louver
Front Panel
Display window
kW
Press the LED button on the remote control will turn off the display screen.
press the LED button again will display the room temperature, press it the third
time will display the current operation power, press it the fourth time will revert
back to display the setting temperature.
The unit has a build-in light sensor to
detect the ambient brightness. When the
light is turned off, the display will dim
down gradually, saving energy and offering
you a comfortable sleep.