ASHCROFT MEDIA FIREPLACE
41
To set the thermostat temperature: Turn on the heater, then press and hold the heater
button (4) for five seconds to enter temperature adjustment mode. The LED function
indicator (2) is red if using Fahrenheit and green if using Celsius. In adjustment
mode, the display (1) flashes (interval is 0.5 second). The temperature setting range
is between 62 to 82
º
F (17 to 27
º
C). In adjustment mode, press the heater button
multiple times until you reach your preferred temperature setting. After you release
the heater button, your preferred temperature will be flashing. Once it stops flashing,
and the display goes dark, the thermostat will be set at your preferred temperature
(and kept in memory).
To lock the heating function in the OFF position, with the main power button on, press
and hold the heater button (4) for ten seconds. The log lights flash several times to
indicate that the heater function is locked. In this mode, there is no heating function but
only glowing logs and normal flame control operation.
To unlock the heating function, press and hold the heater button (4) for ten seconds.
The log lights flash several times and then normal heating function mode is turned on.
NOTE: The heater default temperature is set to 72
º
F (22
º
C). If your ambient room
temperature is above 72
º
F (22
º
C), then your heater will automatically shut off after
few minutes. Adjust your heater thermostat (see below) to a higher temperature in
order to keep your heater ON above 72
º
F (22
º
C).
USING THE FLAME CONTROL
Press the flame button (5) to set the flames for different levels of flame brightness.
These flame levels are shown in the display (1). The flame settings are as follows:
Regardless of the previous flame setting, when powered off by the main power
button, the flames will come on in L4 mode (High) when you turn the heater on.
1
2
4
6
Button Press
Flame Level
Display Value Fireplace Appearance
1st press
High
L4
Flames Highest, Logs Glow Highest
2nd press
Medium
L3
Flames Medium, Logs Glow Medium
3rd press
Low
L2
Flames Low, Logs Glow Low
4th press
Flames Off
L1
Flames Off, Logs Glow Highest
5th press
All Off
None
Flames Off, Logs Off