ASHCROFT MEDIA FIREPLACE
42
Log Glow Mode: To lock the flame function in the OFF position, with the flames in
L4 mode, press and hold the flame button (5) for five seconds. The log lights flash
several times to indicate that the flame function is locked. In this mode, there are no
flames but only glowing logs. Pressing the flame button in sequence will set the logs
for different levels of log brightness. The log brightness levels are shown in the display
(1). The log settings are as follows:
To unlock the flame function, press and hold the flame button (5) for five seconds.
The log lights flash several times and then both flame lights and log lights turn on.
USING THE MAIN POWER BUTTON
Press the power button (6) to turn the fireplace/heater unit on and off. Press the
power button (6) once to turn the unit on. Press again to turn the unit off.
1
5
6
OPERATING INSTRUCTIONS
Button Press
Flame Level
Display Value Fireplace Appearance
1st press
Flames Off
L4
Logs Glow Brightest
2nd press
Flames Off
L3
Logs Glow Medium
3rd press
Flames Off
L2
Logs Glow Low
4th press
Flames Off
L1
Logs Glow Brightest
5th press
All Off
None
Logs Off
