Step 1
Requires:
Floating Shelf (1), Pencil and Level
Using one of the Floating Shelves (1) as a guide, mark the hole locations directly above the
mounting slots onto the wall with a pencil.
Note:
Use a level to ensure the shelf (1) is level before proceeding.
Step 2
Requires:
Power Drill with 3/32” (2.4 mm) Drill Bit and Drywall Anchors (3)
Using a power drill and 3/32” (2.4 mm) drill bit, drill holes at marked
locations. If no studs are present, insert drywall anchors (3) into holes with a Cross-head
Screwdriver. Leave Installation screws (2) exposed 3/16” (4.55 mm - 4.83 mm).
Step 3
Requires:
Floating Shelf (1) and Installation Screws (2)
Secure the shelf (1) to the wall screws (2) by placing the mounting slots located on the
backside of the shelf (1) directly over the exposed wall screws (2). Slowly lower the shelf (1)
until it is secured. Repeat Steps 1-3 for the second shelf.
3
A
S
S
E
M
B
LY
2
1
3
1
2
1
2
