10
11
PRODUCT NO. 088-1718-0
W
AR
R
AN
T
Y
M
A
INTE
N
A
N
C
E
TE
C
H
N
IC
A
L D
ATA
10
11
PRODUCT NO. 088-1718-0
A
SS
E
M
B
LY
Step 9
Requires
D, F
After assembling all the chair parts, make sure all screws are fully tightened. Cover
all screws and screw nuts using the screw caps (D) and screw nut covers (F).
D
F
F
D
Step 10
Requires
5, 6
Turn the chair upright. Place the back cushion (5) and seat cushion (6) on the back
panel and seat panel, respectively. The chair is ready for use.
5
6a
6a
6b
6b
5a
6
Seat Cushion
Back Cushion
Dimensions (L x W x H)
83 x 77.5 x 85 cm
32 5/8 x 30 1/2 x 33 1/2"
Product weight
120 kg
265 lb
NOTE:
• When placing the back cushion, make sure that the zipper (5a) on the back
cushion is facing downward.
• When placing the seat cushion, make sure that the circular corners (6a) of the
seat cushion are facing outward and the square corners (6b) of the seat cushion
are facing inward.
CAUTION!
• Check all screws periodically for tightness. If required, tighten them.
• If required to disassemble the product, follow the assembly steps in the
reverse order.
• Fabric colour may fade after prolonged exposure to light. Keep the cushions
indoors when not in use.
• If surface oxidation (rusting) occurs and no measures are taken to correct
it, the oxidation may start dripping onto the assembly surface, which may
cause damaging stains that may be difficult to remove.
• To wash the cushions:
- Use a soft bristle brush to clean;
- Always use a mild solution of soap and water. Never use detergent;
- Rinse with clean water. The water should be cold to lukewarm, never more
than 25°C (77°F);
- Remove excess moisture from the cushions using a dry towel. Do not place in
washing machine nor hand squeeze.
• Do not use bleach, acid, or other abrasive cleaners on the product.
• Steel components of garden accessories and furniture are treated with rust
inhibiting paint. However, due to the nature of steel, surface oxidation (rusting)
will occur if this protective coating is scratched. This is a natural process. To
minimize this condition, it is recommended that care be taken when assembling
and handling the product, in order to prevent the paint from being scratched.
Surface rust can be removed easily by applying a little cooking oil.
