Canvas A208005504, Assembly Instructions Manual

5 

MODEL NO. 088-2208-8 | PRODUCT NO. 

/ &##"

IMPORTANT SAFETY INFORMATION AND PRECAUTIONS 

Open the door and inspect the hose assembly and burner

prior to each use. If there is evidence of 

excessive abrasion or wear or if the hose or burner is damaged, it must be replaced by an 

appropriate part from the manufacturer. 

 Inspect the gas connections of the appliance prior to each

use. Do not operate the unit if there is 

a gas leak. Have the appliance inspected annually by a qualified service person.  

The pressure regulator and hose assembly provided with the appliance must be used. The replace-

ment part must be the same as the part specified by the manufacturer.

   For instructions on how to connect the LP-Gas tank and check for leaks, please refer to “Gas Connection”  

on page 18 and “Leak Test” on page 19.

   Children and adults should be alerted to the hazards of high surface temperatures and should stay 

away to avoid burns and prevent clothing ignition. 

Young children and pets should be carefully supervised when they are in the area of the appliance.

Any guard or other protective device removed for servicing the appliance must be replaced prior 

to operation. 

Clothing or other flammable materials should not be hung from the appliance or placed on or near 

the appliance.

   Do not use this appliance if any part has been under water. Immediately call a service technician to 

inspect the appliance and to replace any part of the control system which has been under water. 

     The LP-Gas supply cylinder to be used must be constructed and marked in accordance with the specifi-

cations for LP-Gas cylinders of the U.S. Department of Transportation (DOT).

The cylinder supply system must be arranged for vapour withdrawal and the cylinder must include 

a collar to protect the cylinder valve. 

    Use only 20 lb (9 kg) LP-Gas cylinders.

Do not burn wood or any other materials in this appliance.

  The appliance must be isolated from the gas supply piping system by closing its individual manual 

shutoff valve during any pressure testing of the gas supply piping system at test pressure equal to 

or less than 1/2 PSI (3.5 kPa).

Other cylinders may be acceptable for use with the appliance provided they are compatible with 

the appliance retention means and accompanied by illustration(s) depicting the cylinder mounted on 

the appliance using the cylinder retention means and the point of contact between the cylinder and 

the retention means.

Properly place the hose out of pathways where people may trip over it or in areas where they may  

be subject to accidental damage.

The burner must be replaced prior to the appliance being put into 

operation if it is clear that the burner is damaged. The replacement 

burner must be the same as the part specified by the manufacturer.

To clean the appliance,  including the burner, please refer to “Storage

 and Maintenance” on page 20.

18" (46 cm)

12 1/2" (32 cm)