Your gas appliance must be installed on a flat, stable surface, away from any
combustible materials or construction.
1-Remove the appliance from container box and place it on any level, outdoor,
non-combustible surface.
NOTE: Do not place this appliance on grass or dirt area. This may prevent proper
safety venting.
2-Open the gas door and put the cylinder inside.
1) Clean the valve and ensure the tank holder is situated in an appropriate location (Fig. 1).
2) Loosen the tank holder retainer bolt by turning counter-clockwise (Fig. 2). Place the
propane tank on the tank holder (Fig. 3) and tighten the retainer bolt securing the tank to
the tank holder (Fig. 4).
3) Connect the regulator to the propane tank as shown (Fig. 5). Perform a leak test as
described on page 11.
4) Disconnect the regulator from the tank as shown (Fig. 6).
LOCATION
SETUP
Gas Connection
Fig. 1
Fig. 2
Fig. 3
Fig 4
Fig. 5
Fig. 6
