Dimensions (L x W x H)
58.1 x 83.9 x 84 cm
24 x 22 7/8 x 33"
Product weight
5 kg
11 lb 0.4 oz
M
A
IN
T
E
N
A
N
C
E
T
E
C
H
N
IC
A
L
S
P
E
C
IF
IC
A
T
IO
N
S
Step 3
Requires
3
Attach assembled chair to chair legs
3
Firmly hand-tighten the chair legs
3
3
Step 4
Tighten bolts with hex key. Then turn chair right side up.
9
This hardwood furniture is made from FSC
®
-certified eucalyptus wood treated with a
pigmented oil before leaving the factory. Over time with outdoor exposure, the
wood will turn into a natural silvery grey. During weathering, the wood may crack
slightly due to expansion and contraction of the wood. This is normal and does not
affect the structure of the furniture.
• Prior to first use, please remove any oily residue on the wood surface by gently
wiping with a clean, soft cloth.
• To protect the wood and to restore its natural grain appearance, we recommend
annual or more frequent maintenance, latter as required, using Tung, oak or teak
oil. Follow instructions that come with the oil.
• Do not use any abrasives, chemical, bleach or strong solvents to clean.
• Wipe off any food spills immediately with care.
• Store in a cool, shaded area when not in use and cover with an outdoor furniture
cover (not included).
• For outdoor/indoor use only.
• Conditions for use of product: Domestic.
The plastic furniture uses both Polypropylene and fibreglass-reinforced
Polypropylene that is injected into moulds to create furniture that is hard-wearing
with UV resistance. Once injected and formed, Polypropylene and fibreglass
reinforced Polypropylene is extremely durable, creating a long lasting material for
your outdoor furniture.
• Store in a cool, shaded area when not in use and cover with an outdoor
furniturecover. Do not store in heated rooms.
• Clean gently with mild detergent and cold water. Use a soft brush if needed. Do
not scrub. Rinse thoroughly.
• Do not use abrasives, chemicals or solvent cleaners.
ASSEMBLY
8
MODEL NO. 088-1861-6
CAUTION!
• Check all bolts periodically for tightness, tightening them
again as required.
• when assembling steps 1, 2 & 3, hand-tighten with hex key all of bolts.
You should tighten bolts with hex key in final step only.
