Step 1
Connect small base (
C
) to large circle base (
D
), use 4 pcs bolt (
AA
) and washer (
BB
)
to secure as shown above.
Step 2
Turn fire pit component (
B
) upside down and put it on a flat surface, then connect
assembled (
C
) and (
D
) to fire pit component (
B
) with 4 pcs bolt (
AA
) and washer
(
BB
) as shown above.
Note:
Look at the assembled direction of the large circle base (
D
), before assembly,
adjust the opening direction of the large circle base (
D
) to the right side of the control
panel. Turn fire pit component (
B
) as in Fig. 2, fit the pressure regulator through the
opening of the large circle base (
D
), then fix circle base connector (
DI
) to tube of the
large circle base (
D
) by using self-tapping screw (
CC
) as shown in Fig.2.1, and take the
semi-circle side of (
D1
) side down in assembly.
8
ASSEMBLY
Summary of Contents for Dashley 085-1557-8
Page 6: ...6 EXPANDED VIEW H ...
