background image

Parts List 

4

Before You Begin Assembly 

7

Step-by-step Guide 

8

Technical Data  

13

Troubleshooting 14 

Caring for Your Item 

14

Warranty 15

TABLE OF CONTENTS

TOOLS REQUIRED

•  Please read and understand this entire manual before attempting to assemble, operate,        

  or install the product.

•  Any assembly or maintenance of the product must be carried out by adults only.

•   Some parts may contain sharp edges. Wear protective gloves if necessary.

•   To prevent damage, place all parts on a level surface during assembly. Add a layer of 

protective surface if needed.

•   Do not allow your children to climb or jump on furniture due to possible accident, 

injury or death. A child climbing on a piece of furniture can make it top-heavy and 
cause the furniture to tip over.

•   Keep children and pets away during assembly.

•   Repairing and replacing parts should be done by a qualified technician.

•   Do not stand or step on this chair.

•   Do not sit on the front edge of the chair.

•   Do not seat more than one person at a time.

•    Do not exceed the maximum load capacity of 136 kg (300 pounds).

•   This unit is intended for use only within the maximum weight indicated. Use with loads 

heavier than the maximum weight indicated may result in instability, causing possible 
injury.

WARNING! TO REDUCE THE RISK OF SERIOUS INJURY, 

READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE 

ASSEMBLING AND USING THE PRODUCT.

2 People

NOTE:

 

Do not over drill/Be 

aware of over-drilling

No. 2 Phillips Screwdriver

Hammer

Summary of Contents for Holliston CTCSC-3

















Reviews: