Model No. 088-1928-0
ASSEMBLY
6
ASSEMBLY
7
Step 1
Requires
A, B, AA, BB
Place the table top (A) on a soft flat surface. Line up the bolt holes on
the table top (A) with the corresponding bolt holes on the table legs
(B). Insert the M6x15 combination bolts and
washers (AA) and
lightly tighten the bolts using the hex key (BB). Do not completely
tighten until all assembly is completed. Repeat the above steps for the
remaining table legs.
Step 2
Requires
B
Turn the table the correct way up. Adjust the table legs (B) if necessary
and ensure all bolts are securely tighten before use.
AA
AA
AA
B
A
NOTE: Do not
completely tighten.
