STEP-BY-STEP GUIDE
STEP 12
K
x2
J
x2
1. Move unit to desired position.
2. Mark the wall through the holes in the anti-tip brackets
K
.
3. Using a 6 mm drill bit, drill a hole at each mark approximately 1 1/2" (4 cm) deep.
4. Insert two wall anchors
I
into the drilled holes and hammer so that they are flush
with the wall.
5. Attach anti-tip bracket using two big round head screws
J
. Hand-tighten the
big round head screws
J
.
20
NELSON EXTENDING CONSOLE DESK
I
J
I
J
WARNING!
I
x2
TOOLS REQUIRED