Canvys-VT15_17_19_VGAonly_EN_Manual.doc
Heike Rettschlag
8 of 12
5. Signal Connector Pin-outs
To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male
connector.
15-pin Mini D-type Male Connector
Pin Assignment
1 Red Video
6
Red Ground
11
Ground
2 Green Video
7
Green Ground
12
Serial Data/I/O
3 Blue Video
8
Blue Ground
13
H. Sync
4 Ground
9
No Connection
14
V. Sync
5 No Connection
10
Sync-Ground
15
Serial Clock Input
6. Power Saving Feature
When the power saving active them the power indicator LED will be from Green Light to
Amber and power saving feature complies with these VESA power saving modes:
Mode
H. Sync.
V. Sync.
LED
Power Consumption
Normal
On
On
Green
<40W
Stand-by
Off
On
Amber
< 3W
Suspend
On
Off
Amber
< 3W
Off
Off
Off
Amber
< 3W
The monitor uses the H. Sync and V. Sync signals to determine the operation mode to enter.
The monitor power-saving feature automatically turns off H. Sync and V. Sync if there is no
input from the system for a certain period of time. To use this feature, you need a green PC
that is compliant with the VESA power saving feature or a software utility to detect system
input such as keyboard or mouse.
Time Settings
Time settings are adjusted from the system unit by software. To fulfil the requirements in
the NUTEK specification 803299/94 the total time from indicated inactivity to Power Saving
position A2 (VESA OFF) must not be set more than 70 minutes. We recommend you switch
off the monitor when you do not intend to use it for awhile.
