12
WARNING:
Equipment Failure — Magnetic and electrical fields are capable of interfering
with the proper performance of the devices. For this reason make sure that all
devices operated in the vicinity comply with the relevant EMC requirements.
X-ray equipment, MRI devices, radio systems, and cellular telephones
are possible sources of interference as they may emit higher levels of
electromagnetic radiation.
Keep the system away from these devices and verify its performance before
use.
WARNING:
Risk of Suffocation — Dispose of the packaging material, observing the
applicable waste-control regulations and keeping it out of children's reach.
CAUTION:
Personal Injury, Equipment Damage — Check that the ambient conditions
specified by the manufacturers of the different devices are ensured.
Before cleaning the flat-screen display, turn it off and remove power cord from
power supply. Do not spray liquid cleaning agents directly onto the display.
Spray the cleaning agent onto a cloth and wipe the display clean without
exerting any pressure.
Do not place any objects on the signal cables. Route the signal cables and the
power cable to the flat-screen display such that they do not present a stumbling
hazard.
CAUTION:
Personal Injury — All devices used must comply with the applicable IEC/EN or
ISO standard (PCs, for instance, must comply with IEC 60950). This applies to
custom designs in particular.
During operation from flat-screen display (contact to monitor) do not
simultaneous touch patient.
CAUTION:
Equipment Damage — Do not set up the flat-screen display in the immediate
vicinity of a window. Rain, water, humidity and sunlight may damage the flat-
screen display.
Do not exert pressure on the LCD. Excessive pressure may permanently
damage the display.
For safe storage of the flat-screen display, a temperature between -20°C
and +60°C must be ensured. Temperatures above or below this range may
permanently damage the flat-screen display. Always store your flat-screen
display in its original shipping box.
