Safety
-6-
1
Safety
製品概要
各部の名称と
働き
製品仕様
運転と操作
保守・
お手入れ
不具合発生時
の処置
本製品の移送
小型特殊自動車
登録申請の手引き
•
Always set handlebar to fit the operator's physique. Always hold
handle grips with both hands to keep a posture when operating machine.
• Drive at a safe speed, taking into account surface gradient, surface
conditions and load.
• Do not make sudden maneuvers. Sudden start, stop, or turn can make
machine lose control and could cause a tip over. Be especially cautious
when traveling on soft or wet ground.
• On a slippery surface, travel slowly and exercise caution to reduce the
chance of skidding or sliding out of control. Never operate on ice.
• Always make certain that there is no obstacle or person behind machine
when backing up. Make certain that it is safe to back up, then move
slowly and avoid sharp turns.
• To reduce the risk of tipping over, pay special attention when
encountering an obstacle or a slope, or when braking on a slope or
during a turn. See Driving on a slope on the next page.
• Never attempt to drive over a large obstacle such as rock or fallen tree.
• Do not operate machine near the edge of a cliff, an overhang or a
landslide area.
• Use an observer to help direct machine when visibility is poor, terrain is
rugged or hilly, or maneuvering room is limited. An observer should be
able to see machine and its immediate surroundings, and should give
pre-arranged signals to direct the operator.
