Safety
-8-
1
Safety
製品概要
各部の名称と
働き
製品仕様
運転と操作
保守・
お手入れ
不具合発生時
の処置
本製品の移送
小型特殊自動車
登録申請の手引き
Loading and Driving with a Load
• The maximum payload for this machine is 400kg. Do not exceed this
maximum payload under any circumstance.
• Do not operate on a slope steeper than 20 degrees when carrying a
load. Do not carry more than 200kg when operating on a slope between
15 and 20 degrees.
• Place a load in bed so that the weight is evenly distributed. When
carrying a load, strap it to bed to prevent it from shifting. Ensure that the
load does not obstruct the operator's field of view.
• When carrying a load, drive at a reduced speed. Allow greater distance
for braking.
• Before crossing a bridge or an overpass, make certain that the total
combined weight of machine, load and operator is within the stated
weight limit of the bridge or the overpass. Then, proceed carefully and at
a constant speed.
• When going over the top of a slope, go slow; an obstacle, a sharp drop,
or another vehicle or person could be on the other side of the crest.
• Without a load, drive machine backwards up a slope (operator's handle
toward the top) when climbing, and drive it forward when going down a
slope.
• With a load, drive machine forward up a slope (operator's handle away
from the top) when climbing, and drive it backwards when going down a
slope. Be especially cautious when operating on a slope with a load.
