Safety
-9-
1
Safety
製品概要
各部の名称と
働き
製品仕様
運転と操作
保守・
お手入れ
不具合発生時
の処置
本製品の移送
小型特殊自動車
登録申請の手引き
Dumping
When dumping material from bed, take the following precautions.
• Always follow the proper procedures for dumping as described in this
manual.
• Perform dumping operation on a flat, level and stable surface. Do not
dump on a slope or on a rough terrain.
• Make certain that all persons are at a safe distance away from machine
when raising or lowering bed.
• Do not move machine or leave it unattended with bed in the raised
position.
• Engage bed safety prop if you must place any part of your body under
bed in the raised position.
Parking
• Park machine on a flat, level and stable surface. Do not park in a
dangerous place. Never park machine on a slope steeper than 15
degrees. Avoid parking on a slope less than 15 degrees. If parking on a
slope less than 15 degrees is unavoidable, block tracks at the lower end
of machine.
→ Without a load, park machine with operator's handle uphill
→ With a load, park machine with operator's handle downhill
→ Do not park sideways on a slope.
• Observe all the previous precautions for general driving, riding machine,
driving on a slope, loading and driving with a load, and dumping.
• Whenever you park machine, disengage clutch and stop engine.
