Troubleshooting
-78-
6
Troubleshooting
• If any malfunction or abnormal condition is found, immediately stop using the
machine and take an appropriate measure according to the Troubleshooting chart
below. If the malfunction or abnormal condition is not listed in the chart, or the
suggested measure does not solve the problem, consult with your CANYCOM
representative.
• Some corrective measures listed below require special knowledge and/or
equipment. Please contact your CANYCOM representative in such a case.
Area
Malfunction
Possible Cause
Corrective Measure
Ref.
Engine
Engine does not start,
or is difficult to start
Out of fuel.
→Fill fuel.
Page 17
Excessive fuel in the
engine.
→Wait a while and try
starting again.
Battery capacity is
insufficient.
→Add battery fluid.
→Charge battery.
→Replace battery.
Page 64
Page 64
Battery cable is
disconnected.
→Connect the battery
cable.
Insufficient or wrong
oil.
→Fill or change oil.
Page 48
Dirty or damaged
spark plug.
→Clean or replace the
spark plug.
Page 51
Other (other than the
above).
→Follow the
instructions in
"Starting" to restart.
If problem persists,
please contact
your CANYCOM
representative.
Page 20
Engine stalls.
Out of fuel.
→Fill fuel.
Page 17
Engine stops abruptly.
Out of fuel
→Fill fuel.
Page 17
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Idling is not stable.
Insufficient intake air
(clogged air cleaner).
→Clean or replace the
air cleaner.
Page 50
Other (other than the
above).
→Please contact
your CANYCOM
representative.
