Safety
-4-
1
General Driving
• Always check for obstacles before operating on new terrain.
• Always travel slowly and use extra caution when operating on unfamiliar terrain. Be
alert when traveling on changing terrain.
• Drive at a safe speed, taking into account surface gradient, surface conditions and
load.
• Do not make sudden maneuvers. Sudden start, stop, or turn can make machine lose
control and could cause a tip over. Be especially cautious when traveling on soft or
wet ground.
• On a slippery surface, travel slowly and exercise caution to reduce the chance of
skidding or sliding out of control. Never operate on ice.
• Always make certain that there is no obstacle or person behind machine when
backing up. Make certain that it is safe to back up, then move slowly and avoid
sharp turns.
• To reduce the risk of tipping over, pay special attention when encountering an
obstacle or a slope, or when braking on a slope or during a turn. See Driving on a
slope on the next page.
• Never attempt to drive over a large obstacle such as rock or fallen tree.
• Do not operate machine near the edge of a cliff, an overhang or a landslide area.
• Use an observer to help direct machine when visibility is poor, terrain is rugged or
hilly, or maneuvering room is limited. An observer should be able to see machine
and its immediate surroundings, and should give pre-arranged signals to direct the
operator.
