7.
5
Item
*Security
location
*
(Fig. 7.
6
)
for CNSS-KA
1
W model only
You need to select a room where you want to place the sensor. Take one of the sensors: the
motion sensor (Fig. 1.2) or the door sensor (Fig. 1.3).
* Reminder: the door sensor consists of two elements - receiver (Fig. 1.3) and receiver
sensor (Fig. 1.4).
*
Important: before starting the connection, you must install the batteries.
Motion sensor
:
3
хAAA batteries, and turn it on. Receiver: A23 12V battery.
Fig. 7.
6
Now you are ready to start pairing the sensor.
Select the room in which the sensor will be installed and select the sequence number where
the sensor will be programmed (Fig. 7.
7
).
* Example: room -
Window
, position No 1.
Fig. 7.
7
