CNP-WF511N2
Wireless N PCI Adapter
21
¾
WPA/WPA2:
Wi-Fi Protected Access
¾
WPA/WPA2 Passphrase:
Wi-Fi Protected Access Passphrase
¾
802.1x:
Enables 802.1x security.
¾
Pre-Shared Key (Static WEP):
Enables the use of shared keys that are defined on both
the access point and the station. To define shared encryption keys, choose the Shared Key
radio button and click
Configure
to fill in the Define Shared Keys window (shown in Figure
3-5).
)
Note:
The
WEP
security mode is not available for 802.11n.
¾
None:
No security (not recommended).
)
Note:
If the access point which the Adapter is associated has WEP set and the client has WEP enabled,
make sure that
Allow Association to Mixed Cells
is checked on the Security tab to allow
association. To complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the
Advanced
tab of this
Profile Management
dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
Figure 3-5
)
Note:
Select different
Security Options
, the configurations are different; you can select the
appropriate security option and configure the exact key as your need.
3. Edit the Advanced tab
This screen below allows you to make advanced configuration for the profile.
