Compass Mode
Precautions:
z
Please keep the device away from all magnets or appliances that generate
magnetic fields such as mobile phones, speakers, motors, etc.
z
The device, like most magnetic compass, points to the magnetic North which
is slightly different from the true North. Please refer to section below for more
details.
z
Please perform compass calibration under the following conditions:
1.
Using the device for the first time.
2.
When the magnetic distortion icon OFF CAL indicator is flashing.
3.
After battery replacement.
4.
When the device was calibrated at a distanced location.
z
To acquire a more accurate measurement, please avoid using the device
under the following conditions:
1.
When the device is in vicinity of magnets or magnetized objects.
2.
When the device is in vicinity of electrical appliances.
3.
When the device is inside a moving object or a reinforced concrete
building.
Magnetic
Declination
z
Press [SR] anytime during main
menu to cycle through Altimeter
Mode, Barometer Mode, and
Compass Mode.
z
The device provides magnetic
directions, compass bearing, and
magnetic North pole direction.
z
The Compass Mode enters IDLE
Mode to extend device battery life if
no action is performed for more than
1 minute. Press any button except
[EL] to resume normal operation.
NOTE:
1.
The Magnetic North Pole is slightly different from the True North Pole. The
device, like most magnetic compass, points to the Magnetic North Pole while
directions on maps are measured in accordance to True North Pole.
Summary of Contents for CNS-DC3
Page 28: ......
