Time setting
To enable automatic setting of the time,
connect your watch to the phone via
Canyon Fit.
To make manual settings, do as follows:
Press button D and hold it till the device
switches to the `time setting mode’: the
time indicator begins to blink. By using
buttons A and C to increase or decrease
the numeric value, you can set the time.
Use button D for switching between
hours, minutes and the date display mode
(24 or 12 hours) Store your settings by
briefly clicking button B.
Date setting
To enable automatic setting of the date,
connect your watch to the phone via
Canyon Fit.
To make manual settings, do as follows:
Briefly click button B to display the
current date.
Press button D and hold it till the device
DISPLAY MODES FUNCTIONS ON THE SCREEN:
All the display modes and the principle of navigating through the menu are
shown in Fig. 2.
switches to the `date setting mode’: the date indicator begins to blink. By using buttons A and C to increase or decrease the
numeric value, you can set the date. Use button D for switching between the year, day and month.
Briefly click button B to save the current settings.
Alarm clock setting
As displayed in Figure 3, enter the `alarm clock screen’ by using button B. To set the alarm clock, press and hold button D.
Use buttons A and C to activate and set the new alarm time. Use button D for switching between hours and minutes. Press
button B to store changes.
After the alarm is activated, switch off the alarm clock by pressing any button.
Device use:
To switch on the backlight, short click button A.
To activate Bluetooth on the watch, press button A and hold it till a corresponding symbol appears on the screen.
Use button B for the navigating through the watch menu. The menu mode will change each time this button is pressed.
4
