7
ENG
Installing the SIM card (fig. D, E)
. The device must be turned off while the
card is being installed. Before installation, make sure that the nano-SIM
card is activated, 4G data transmission is connected and the PIN code
request is disabled. Use a screwdriver to loosen the screws and remove
the SIM card slot cover. Next, using tweezers, carefully remove the SIM
card slot (7). Place the nano-SIM card in the slot, then insert the slot into
the watch. Close the cover and securely fasten the screws with a
screwdriver.
Turning on the device
. Hold down button 1 for 2 to 3 seconds to turn on
the device.
Quick menu
. While on the screen dial, swipe down to go to the quick menu.
Here you can find data about GSM and 4G signal levels, battery level,
information about time, date and day of the week, screen brightness and
sound volume controls, as well as access to the device settings. To return
to the main screen dial, press the button 2.
Turning off the device
. While on the screen with the dial, swipe down.
Select "Settings". In the menu that appears, tap "Turn off" and confirm the
action.
OPERATION
Install the app and connect the watch to it
. You need to install the free
Canyon Life
app to make the watch and your smartphone work together
fully. Scan the QR code (see p. 2) to go to Google Play or App Store,
download and run the app. Log in to your account or register a new account.
To register a new watch in your account, you need a registration code. From
the watch dial screen, swipe to the right or left to open the device
information, then scan the registration code with your smartphone camera
or enter the code manually in the app field. The registration code can also
be found on the label of the device. After successfully registering and
connecting the watch to the application, you can use it, configure and
control its operation. For detailed information about configuring the app, see
the full user manual available at
canyon.eu/drivers-and-manuals
.
Outgoing calls
. On the home screen, swipe either to the left or right, select
"Call" and enter the desired phone number. Alternatively, go to "Contacts"
and select the desired contact. Then press "Call" to make a call. To cancel
the call, press button 2.
Note
. To add numbers to your phone book, go to the app.
Incoming calls
. When a call comes in, tap "Accept" on the screen to
answer or "Reject" to reject the call. After filling out the phone book, using
the app, you can prohibit incoming calls from unknown numbers, so that
calls will come only from the saved numbers.
Emergency call
. You can save up to three emergency numbers in the app.
To start an automatic emergency call, press and hold button 1 for 2–3 s.
The device will call the three saved numbers: alternatively, 2 times each,
until one of the called answers.
Location
. The app records the coordinates of the watch transmitted over a
secure channel, with the frequency set in the app. Depending on the
location, the watch will send GPS or LTE coordinates.
