EN
EN
Blood oxygen measurement.
Stay on
SpO2 interface to measure blood oxygen,
it will take around 1 minute. When finished
watch will vibrate.
* For the correct calculation of these parameters, be sure to
specify the correct parameters in the app settings after connecting
the device (height, weight, age, etc.).
Attention
!
The measurement results are for informational pur-
poses only and should not be the basis for medical
diagnoses.
Incorrect posture, talking, hand position, skin mois-
ture, tightness of the bracelet on the wrist, etc., affect
the accuracy of the measurement.
2. activities data
Long press touch button to go to the activi-
ties results screen: number of steps taken
*
,
estimated distance, calories burned for the
current day. Long press the “back” key to
go back to the previous menu.
3. Sport
There are 4 sport modes:
Running
Rope
Bicycle
Yoga
range from 36.2 to 42 degrees Celsius. If the sensor
records a temperature higher than 37, it vibrates and
shows a red symbol on the WF as an alert. The data
is recorded and sent to APP after synchronization.
Attention!
Sb-42 has a CT1711 high accuracy thermometer
sensor, which is located on the back of the case.
However, a smart band is not a medical device. The
sensor has a non-linear measurement accuracy,
which depends on the value of the measured
temperature. In addition, the gap is affected by the
ambient temperature and the tightness of the watch
sensor to the skin. At a normal body temperature of
36.6 degrees, the measurement error is higher than
at an elevated body temperature. When measuring
temperatures above 37 degrees, the gap is minimal.
Also, the external environment may influence at the
final result: the bracelet when outdoors may show a
lower temperature; covered with a blanket or clothing
it may show a higher temperature than the real
temperature.
Heart Rate.
Open the heart rate interface
and wait to start the heart rate measure-
ment. The result will be displayed on the
screen and sent to the smartphone. This
function can also be launched from the app
by selecting the appropriate menu item.
