VOLUME
The Speaker Volume is also controlled by the
POWER/VOLUME KNOB (8)
.
•
To Increase the Volume: Turn the
POWER/VOLUME KNOB (8)
clockwise.
•
To Decrease the Volume: Turn the
POWER/VOLUME KNOB (8)
counterclockwise.
PLAYING A RECORD
1. Set the
SPEED CONTROL SWITCH (7)
to the correct speed for your
record (33
⅓
, 45, or 78 RPM).
2. Place the record on the turntable being careful to place the spindle directly
in the record hole.
•
We have included a 45 RPM ADAPTER
(10)
to use when playing 45
RPM records. Just pull the adapter from its convenient storage space
next to the rear of the TONEARM and place it over the spindle.
3. Unlock the TONEARM LOCK
(3)
by
gently pushing the Lock to the right
and the TONEARM
(2)
will be ready for play.
•
CAUTION
: Always lock the TONEARM
(2)
in place using the
TONEARM LOCK
(3)
when the player is not in use or the turntable is
being moved. Failure to do so can cause damage to the cartridge or
stylus.
4. Turn the
POWER/VOLUME KNOB (8)
clockwise to turn the Player ON.
5. Adjust the Volume to the desired level by turning the
POWER/VOLUME
KNOB (8)
.
6. Raise the TONEARM
(2)
by slowly lifting the TONEARM LEVER
(5)
.
7. Using your finger move the TONEARM
(2)
over the portion of the record
you want to hear. The record automatically begins spinning once the
TONEARM
(2)
is over the
record surface.
8. Lower the TONEARM
(2)
using the
TONEARM LEVER
(5)
until the
STYLUS
(15)
touches the record and begins playing your music. Make
sure the TONEARM LEVER
(5)
is completely down.
9. When finished listening, use the TONEARM LEVER
(5)
to raise the
TONEARM
(2)
and then place it back on the TONEARM REST
(4)
. The
record will automatically stop spinning.
10. If finished using the Turntable, be sure to lock the TONEARM LOCK
(3).
